Getting Started with Arduino & Lights

From Interaction Station Wiki
Jump to navigation Jump to search
Stationskill lights.png

Introduction

Are planning to add light to your work?
Do you want the light source in your installation to be controlled by sensor data?
Are you curious about the possibilities of programming lights with Arduino?


During this station skill, you will be introduced to some standard methods of programming lights with Arduino.
Arduino is a microcontroller that makes it easy for us to work with different kinds of hardware like lights, motors and a wide array of sensors. During this station skill, we will use it to work with lights. We will do this during three sessions, each one focused on working with different kinds of lights: LEDs, LED strips and light bulbs.

Station Skill schedule
Week: 16
Date Fri 21 Apr 2023
Time 09:00-12:00
Arduino & LEDs
Week: 17
Date Fri 28 Apr 2023
Time 09:00-12:00
Arduino & LED strips
Week: 19
Date Sat 13 May 2023
Time 09:00-12:00
Arduino & Relays

Session 1

What can you do with it?

Examples

  • Soliloquy, Tromarama, 2018
https://www.youtube.com/watch?v=qKJsV6Dyt9A
  • wave is my nature, vtol, 2015
https://vtol.cc/filter/works/wave-is-my-nature
  • Game of me, Xuanning Chen
http://xuanningchen.net/?page_id=199
  • Healer, Pamela Ronsenkranz
https://spruethmagers.com/exhibitions/pamela-rosenkranz-london/
  • Alain Le Boucher
https://galeriewaltman.com/en/alain-le-boucher
https://www.youtube.com/watch?v=qGJ5yHyasuY&t=55s
  • Collection of light, Humans since 1982, 2011
https://www.humanssince1982.com/collection-of-light
  • Tatsuo Miyajima
Time fire in the stone lantern - https://tatsuomiyajima.com/work-projects/time-fire-in-the-stone-lantern/
Life (le corps sans organes) - https://tatsuomiyajima.com/work-projects/life-le-corps-sans-organes-no-17-2013-no-10-2014/
  • Eigengrau, Zalan Szakacs
https://www.zalan-szakacs.com/projects/eigengrau/

Arduino and LEDs

Leds.gif

The LED

What is an LED?
LED is short for light emitting diode, is a semiconductor device that emits light when an electric current is passed through it. Light is produced when the particles that carry the current (electrons and holes) combine together within the semiconductor material.
LEDs come in different colors. Different semiconductor materials with different bandgaps (separation of the bands containing electrons and holes) produce different colors of light.
Anodecathode.jpegBattery led.gif
In an LED, energy flows in one direction, generating the luminous effect at the top, where the semiconductor is. LEDs have two legs, corresponding to the positive and negative side, also known as Anode and Cathode. These can be distinguished because the positive leg, the Anode, is longer than the other one. If we connect these two poles to a battery, the LED will turn on.

Arduino: how does it work

Arduino is a microcontroller, a type of device, like a small computer, designed to execute simple tasks. Arduino is used by a wide for building digital devices and interactive objects that can sense and control the physical world.

You can check other examples of what Arduino can do.


The Arduino board The Arduino IDE
Arduino is composed of two major parts: the Arduino board, which is the piece of hardware you work on when you build your objects; and the Arduino IDE, the piece of software you run on your computer. You use the IDE to create a sketch (a little computer program) that you upload to the Arduino board. The sketch tells the board what to do.

The board

The Arduino board is based on a simple input/output (I/O) logic. On the board you can see a series a pins, which are the places where you connect your external components (like LEDS, sensors and so on) through wires.
The Arduino has different kinds of pins, each of which is labeled on the board and used for different functions.
Analog Input Pins ( we have six of them in the Uno): The area of pins under the ‘Analog In’ label (A0 through A5 on the UNO) are Analog In pins. These pins can read the signal from an analog sensor (like a temperature sensor) and convert it into a digital value that we can read.
Digital Input Pins (seven on the Uno): Across from the analog pins are the digital pins (0 through 13 on the UNO). These pins can be used for both digital input (like telling if a button is pushed) and digital output (like powering an LED).
Board layout.PNG

Connecting the LED to Arduino

Now we are going to connect Arduino to an LED. You will need:

Led one.jpg
Connect the Pins following the scheme:

  • Anode(+) of the LED (the longer leg) to Digital pin 13;
  • Cathode(-) of the LED (the shorter leg) to Ground(GND);

You can connect this directly to the Ground Pin or you can connect it to any point the negative rail of the breadboard. This one that needs to be connected to the Ground pin. This last option is preferable in case you want to connect other LEDS or components that also need to be connected to the Ground pin.

Programming the LED

Now we are going to program the board to control the LED.To program your board you can use Arduino's own software that allows use to write code and upload it on the board.
+ Open the Arduino software
You can open the Arduino IDE software on the computer. This is already installed in WH.02.108 and most of the computers at the Interaction Station. If you want you can also use it on your laptop, you can install it thought this link.
It should look like this:
Ide first.png
+ Connect the board
You can now connect the board to the computer: this will enable us to upload the sketch as well as to power the board. If the software found your board your will see it on the bottom right corner. If not, it will show [not connected]. To make select the board and the port you can go to Tools>Board and select your Arduino model, in our case is the Arduino Uno. To check if the right port is selected you can go to Tools>Port and select it. Often the software recognises it already and puts the board name between () after the port name.
In the new version of Arduino you can see board and port directly on your sketch window.


Ide board.png

Turn on the LED

void setup() {
  // put your setup code here, to run once:
  pinMode(13, OUTPUT);
  digitalWrite(13, HIGH); // turn LED on (output 5V)
}

void loop() {
  // put your main code here, to run repeatedly:

}

Blinking LED

void setup() {
  // put your setup code here, to run once:
  pinMode(13, OUTPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
    digitalWrite(13, HIGH); // turn LED on (output 5V);
    delay(500);
    digitalWrite(13, LOW); // turn LED on (output 5V);
    delay(500);
}

!!!!Note:
The delay() function pauses the program for an amount of time expressed in milliseconds. For reference, 1000 milliseconds = 1 second.

Fading LED

int led = 9;         // the PWM pin the LED is attached to
int brightness = 0;  // how bright the LED is
int fadeAmount = 5;  // how many points to fade the LED by

void setup() {
  // put your setup code here, to run once:
  // declare pin 13 to be an output:
  pinMode(led, OUTPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  // set the brightness of pin 9:
  analogWrite(led, brightness);

  // change the brightness for next time through the loop:
  brightness = brightness + fadeAmount;

  // reverse the direction of the fading at the ends of the fade:
  if (brightness <= 0 || brightness >= 255) {
    fadeAmount = -fadeAmount;
  }
  // wait for 30 milliseconds to see the dimming effect
  delay(30);
}

!!!!Note:
AnalogWrite() uses pulse width modulation (PWM), turning a digital pin on and off very quickly with different ratios between on and off, to create a fading effect. The fading effect is possible to achieve only when using the PWM (Pulse with modulation) Pins. On most Arduino, the PWM pins are identified with a "~" sign. For this reason we moved the LED on Pin 9.


LEDs traffic light

What is you want to connect more than one LED?
Led traffic lights bb.jpg

int greenLed = 13;
int yellowLed = 12;
int redLed = 11;

void setup() {
  // put your setup code here, to run once:
  pinMode(greenLed, OUTPUT);
  pinMode(yellowLed, OUTPUT);
  pinMode(redLed, OUTPUT);
}

void loop() {
  
  // put your main code here, to run repeatedly:
    //turn green light on for 3 seconds
    digitalWrite(greenLed, HIGH); 
    delay(3000);
    //turn off green light and turn yellow light on for half a second 
    digitalWrite(greenLed, LOW); // turn LED on (output 5V);
    digitalWrite(yellowLed, HIGH); 
    delay(500);
    //turn off yellow light and turn on red light for 3 seconds 
    digitalWrite(yellowLed, LOW); // turn LED on (output 5V);
    digitalWrite(redLed, HIGH); 
    delay(3000);
    digitalWrite(redLed, LOW); 
    
}

LED Morse code

Light can also be used to brighten an area or an object but can also be used to send messages. We will try to make our LED talk with the help of an old times favourite: Morse code.
Here is the reference:

Morse code reference

Letters
A .-
B -...
C -.-.
D -..
E .
F ..-.
G --.
H ....
I ..
J .---
K -.-
L .-..
M --
N -.
O ---
P .--.
Q --.-
R .-.
S ...
T -
U ..-
V ...-
W .--
X -..-
Y -.--
Z --..
Numbers
0 -----
1 .----
2 ..---
3 ...--
4 ....-
5 .....
6 -....
7 --...
8 ---..
9 ----.
Punctuation
Period           (.) .-.-.-
Comma            (,) --..--
Question Mark    (?) ..--..
Apostrophe.      (') .----.
Exclamation Mark (!) -.-.--
Prosigns
Starting signal      -.-.-
End of work          ...-.-
New message follows  .-.-.

Since Morse Code is just a combination of dots(.) and dashes (-) we can convert this graphical elements into time units.

dot(.) = 1 unit = 1 second
dash(-) = 3 units = 3 seconds
The space between parts of a letter in 1 unit = 1 second
The space between letters in 3 units = 3 second
The space between words is 7 units = 7 seconds

Resources/More

Session 2

Arduino and LED strips

LED strips

Led strip.gifNeopixel.jpeg
An LED strip consist of many individual LED emitters mounted on a narrow, flexible circuitboard.
Many of the LED strips you can find on the market are commercialised by Adafruit and they are called Neopixels. Each strips (but not only strips, as they can come in different formats) is made of separate LEDS called Pixels (one LED = one Pixel).
Every LED that makes a strip (or a Pixel), is actually made of 3 different separate diodes within the same cell, and each of these diodes emits its designated color - red, green, or blue. By programming the intensity of each diode you can obtain different colors.

Types of strips

When you are looking for LED strips you’re likely to come across a huge variety of different types. One of the most important distinctions we can do is between digitally addressable strips and not addressable ones.

  • Addressable strips

These are the ones that you can program: you can determine pixel by pixel which color, brightness or sequence you want to apply to those. These types usually have 3 pins of more: +,-, signal pin(s).

  • Not addressable strips

These types usually come already in a color (usually white, blue, green and so on) that cannot be changed. Unlike the addressable ones you will not be able to specify different settings for each pixel. Your strip will act as a whole. These strips usually have only two pins: + and - .

If you are about to buy LED strips and you feel overwhelmed by the variety of models, letters and configurations, you should have a look at this guide first: https://thesmartcave.com/led-strips-guide/.

Powering the LED strips

Another challenge you might encounter while working with LED strips is to understand which is the correct power supply. You can usually determine this by looking at the product data sheet. The requirements of Voltage and current are usually listed there and they vary accordingly to the product.


Connecting the LED strip to Arduino

Ledstrip basic.jpg

Programming the LED strip

color, intensity, for loop
Ledstrip pot.jpg


Ledstrip currentupgrade.jpg

Session 3

Arduino and Relays: how to control light bulbs (and not only)

Examples of work

The Relay

Connecting the Relay and the light bulb to Arduino

900px 900px

Programming the relay

Add a distance sensor

Relay ultrasonic.jpg

Useful links