Difference between revisions of "Mindwave EEG sensor"

Revision as of 12:29, 7 May 2020

Intro

This page tells you about using the "real" Mindwave Mobile 2.

It can be ordered at amazon.com, or amazon.nl: https://www.amazon.nl/neuroSky-Estate-neurofeedback-headset-MindWave/dp/B07CXN8NKX/ref=sr_1_1?__mk_nl_NL=ÅMÅŽÕÑ&keywords=mindwave+mobile&qid=1588840419&sr=8-1 It costs at the moment 155 euro.

bluetooth connection and data connection

You need a "fresh" normal AAA battery for the head set.

I tried to connect bluetooth to my MACOS laptop, and a Android telephone, both connections started and then failed.

But then the bluetooth worked...on a bigger MAC. But this is only half of the story, the second stage which has to be working is the data picked up by the sensor on the headset.

For the proper data, the head set must be very well adjusted.

I could finally open the "MindWave Mobile Tutorial.zip" in the folder "Mac Setup Kit". This zip is strange enough an app - I thought this was a zip containing documents and guides!

This app indicates if your bluetooth connection is of sufficient quality for the data. At first it didn't work at all....

I did a lot of fitting and refitting of the headset, and finally got started having a connection it liked.

This might cause problems if you use an Arduino connection...how can you then tell the connection is not what it should be?

Installing software at your laptop

I tried to install the software

Thinkconnector and Brain Visualiser

on my MACOS, but ... it is not running at the moment on a 64 bits operating system.

Then I tried to install it on my windows 8 laptop.

Then ... it suddenly worked at the bigger MAC - with this zip file indicated above.

testing

With the right kind of connection, and if this zip-app is happy about the connection you can test your "Attention", "Meditation", and "Blink".

The blinking was not reacting for me.

Connecting to an Arduino

Using the BlueSMRF of Sparkfun, you can connect with a microcontroller: https://www.sparkfun.com/products/12577

This page describes the method: https://learn.sparkfun.com/tutorials/hackers-in-residence---hacking-mindwave-mobile?_ga=2.119566220.586279972.1588843981-1489689171.1588843981

So back to the soldering device

@@ Line 11: / Line 11: @@
 [[File:Mw8.png|200px]]
-== bluetooth connection ==
+== bluetooth connection and data connection==
 You need a "fresh" normal AAA battery for the head set.
 I tried to connect bluetooth to my MACOS laptop, and a Android telephone, both connections started and then failed.
-But then it worked...on a bigger MAC.
+But then the bluetooth worked...on a bigger MAC. But this is only half of the story, the second stage which has to be working is the data picked up by the sensor on the headset.
-Then for the data, apparently the head set must be very well adjusted.
+For the proper data, the head set must be very well adjusted.
 [[File:Mw1.png|300px]]  [[File:Mw2.png|300px]]