E-textile swatches
Jump to navigation
Jump to search
Collection of E textile Swatches.
|
These swatches contain a fabric part and an electronic part. Often electronics and fabric or other materials are intertwined, mixed, used by each other. |
Circuit, buttons and switches
Buttons of metal, used for trousers as a switch.
Big ring of metal used as a switch.
|
Piece of aluminum foil on fabric using flysofix as a switch which folds to close the circuit and start an led. |
ATtiny85 swatches
|
Charlieplexing, 8 leds connected to the four pins of the ATtiny85. |
|
Folding with ATtiny85 and 5 leds. An example of interaction between material and led. |
Sensor swatches
|
|
Tilt sensor made of three conductive patches which form a circle. The circuit is closed by swinging the bead over these patches. |
|
LDR in combination with a fixed resistor. ATtiny85 can blink with 2 leds. |
|
Themistor (NTC) with a fixed resistor. ATtiny85 can blink with 2 leds. |
|
Pressure sensor with a fixed resistor. ATtiny85 can blink with 2 leds. |
|
|
Arduino Pro Mini with LCD screen and 3 sensors, light, temperature and pollution. Lipo battery plus charger. |
Led swatches
|
Different red leds, from 10mm, 5mm, 1mm and an smd led. |
|
|
Parallel leds in a circuit with an open connection, use something conductive to close the circuit. |
|
RGB neopixels. ATtiny85. One of the neopixels is covered by filling and cloth to investigate the effect of the light under fabric. |
|
A piece of copper strip with smd leds soldered on the copper strip. Parallel connections. |
555 swatches
|
|
Textile speaker. 9V, use of magnets. |
Transistor swatches
|
Darlington array. By amplifying the signal with 2 transistors you can detect if a human touches a pad of aluminum foil. You need to touch both pads. |
|
Transistor switch. LDR in connection with a fixed resistor makes the BC457 into a switch. |