Mindwave EEG sensor

From Interaction Station Wiki
Jump to navigation Jump to search


Intro

This page tells you about using the "real" Mindwave Mobile 2.

It can be ordered at amazon.com, or amazon.nl: https://www.amazon.nl/neuroSky-Estate-neurofeedback-headset-MindWave/dp/B07CXN8NKX/ref=sr_1_1?__mk_nl_NL=ÅMÅŽÕÑ&keywords=mindwave+mobile&qid=1588840419&sr=8-1 It costs at the moment 155 euro.

Ee2.png Mw8.png

bluetooth connection and data connection

You need a "fresh" normal AAA battery for the head set.

I tried to connect bluetooth to my MACOS laptop, and a Android telephone, both connections started and then failed.

But then the bluetooth worked...on a bigger MAC. But this is only half of the story, the second stage which has to be working is the data picked up by the sensor on the headset.

For the proper data, the head set must be very well adjusted.

Mw1.png Mw2.png

I could finally open the "MindWave Mobile Tutorial.zip" in the folder "Mac Setup Kit". This zip is strange enough an app - I thought this was a zip containing documents and guides!

This app indicates if your bluetooth connection is of sufficient quality for the data. At first it didn't work at all....

I did a lot of fitting and refitting of the headset, and finally got started having a connection it liked.

Mw9.png Mw10.png

This might cause problems if you use an Arduino connection...how can you then tell the connection is not what it should be?

Installing software at your laptop

I tried to install the software

Thinkconnector and Brain Visualiser

on my MACOS, but ... it is not running at the moment on a 64 bits operating system.

Then I tried to install it on my windows 8 laptop.

Then ... it suddenly worked at the bigger MAC - with this zip file indicated above.

testing

With the right kind of connection, and if this zip-app is happy about the connection you can test your "Attention", "Meditation", and "Blink".

Mw3.png Mw4.png Mw5.png Mw6.png

The blinking was not reacting for me.

Connecting to an Arduino

Using the BlueSMRF of Sparkfun, you can connect with a microcontroller: https://www.sparkfun.com/products/12577

This page describes the method: https://learn.sparkfun.com/tutorials/hackers-in-residence---hacking-mindwave-mobile?_ga=2.119566220.586279972.1588843981-1489689171.1588843981

So back to the soldering device

Mw11.png

Mw12.png