CPX-CircuitPython

From Interaction Station Wiki
Jump to navigation Jump to search

First things first: what is a microcontroller?

Computer and processor are generic terms for anything that can run a program, basically.
A controller or microcontroller usually refers to a simple processor that does only one task, like listening to sensors.
In explaining microcontrollers, we’ll distinguish them from computers, which contain more powerful processors that can run an operating system.
One of the most used microcontroller is Arduino. In this case though we will be talking about Adafruit Circuit Playground, a board with a hand design for several project.

Adafruit Circuit Playground Express

How's that different from an Arduino?

The Circuit Playground Express & Blue Fruit, produced by Adafruit, are microcontrollers, just like the Arduino Uno, but designed for wearable projects.

Thus, is a little different from the normal boards from the hardware side, since the pins go out to those big wide sewable pads, instead of normal pin headers (like on the Uno)

because Circuit Playground Express running on a faster processor compared to Arduino Uno. We can also use it for audio-based projects.
Da1d-ADA-3333-1-0-2-1000x667.jpg

CircuitPython & MU Editor

Circuitpython circuit playground adafruit blinka computer.png 17850097.png

Python is the fastest-growing programming language. And CircuitPython is based on Python language but designed to run on microcontroller boards.

CircuitPython is designed with education in mind.

It's easy to start learning how to program and you get immediate feedback from the board.


Before we start we all have to do this to set up:

1. Install or update CircuitPython!

https://learn.adafruit.com/adafruit-circuit-playground-express/circuitpython-quickstart

*1. Click the link below and download the latest UF2 file:
https://circuitpython.org/board/circuitplayground_express/
*2. Plug your Circuit Playground Express into your computer via a (data)USB cable.
*3. Double-click the small Reset button in the middle of the CPX(short for circuit playground express).
 you will see all of the LEDs turn green. If they turn all red, check the USB cable, try another USB port, etc.
 (If double-clicking doesn't do it, try a single-click!)
*4. You will see a new disk drive appear called CPLAYBOOT
  Drag the adafruit-circuitpython-etc...uf2 file onto it.
*5. The CPLAYBOOT drive will disappear and a new disk drive will appear called CIRCUITPY

That's it! You're done :)

2. Installing Mu Editor

Download Mu from(if you are using computers from school, the Mu Editor is already installed)

https://codewith.mu

Circuitpython mu-front-page.png


The first time you start Mu, you will be prompted to select your 'mode' -

you can always change your mind later. For now please select CircuitPython!


Circuitpython Screen Shot 2017-12-24 at 2.55.02 PM.png


Mu attempts to auto-detect your board, so please plug in your CircuitPython device and make sure it shows up as a CIRCUITPY drive before starting Mu

Circuitpython Screen Shot 2017-12-24 at 3.16.23 PM.png


CPX onboard sensors & Pinouts

1. Green LED lets you know that the CPX is powered on.------ 2. Red LED on Digital pin#13

Circuit playground on-greenled.jpeg Circuit playground d13.jpeg

3. This small button is for Resetting the board. ------------------ 4. Button A and B on Digital pin #4 and #5

Circuit playground reset.jpeg Circuit playground pushbutton.jpeg

5. slide switch on Digital pin #7 - - - - - - - - - - - - - - - - - - - - - - 6. 7 Capacitive Touch pads from A1-A7

Circuit playground slide.jpeg Circuit playground captouch.jpeg

7. Light Sensor on pin A8 - - - - - - - - - - - - - - - - - - - - - - - - - - - 8. Temperature Sensor on A9

Circuit playground lightsensor.jpeg Circuit playground temp.jpeg

9. motion sensor (LIS3DH xyz) - - - - - - - - - - - - - - - - - - - - - - - - - 10. Microphone Audio Sensor

Circuit playground adxl-motion.jpeg Circuit playground mic.jpeg

11. speaker and audio output pin on A0

Circuit playground spkr.jpeg Circuit playground a0.jpeg Circuit playground hp.png

12. Infrared Receive/Transmit

Circuit playground ir.jpeg


Pinouts:




A0 / D12 - true analog output so it's great for playing audio clips.

A1 / D6 - digital I/O, or analog Input, PWM output,capacitive touch sensor

A2 / D9 - digital I/O, or analog Input, PWM output,capacitive touch sensor

A3 / D10 - digital I/O, or analog Input.PWM output,capacitive touch sensor

A4 / D3 - digital I/O, or analog Input, capacitive touch sensor

A5 / D2 - digital I/O, or analog Input, capacitive touch sensor

A6 / D0 - digital I/O, or analog Input, PWM output,capacitive touch sensor

A7 / D1 - digital I/O, or analog Input, PWM output,capacitive touch sensor<be>

Let's start coding

3. Hello, World!

In the code area, where it says, # Write your code here :-), write the following code:

print( 8 )

Then click the Save button to save the code and run it on the CircuitPlayground.

You should see this message appear in the Serial Dialogue Panel:

code.py output: 8

Change the message to something else. If you want to print characters instead of numbers, you must use quotation marks.

print( "hello" )

Let's program the device to print two things, with a time delay in between the two print statements:

import time

print( "hello" )

time.sleep( 0.5 )

print( "World" )

Now let's make a loop, so the message will be running forever:

#short cuts: Tab key , Shift-Tab, command(control)-k

# Write your code here :-)

import time

while True:
   print("hello")
   time.sleep(0.5)
   print("world!")
   time.sleep(0.5)


Indentation and commenting options

Python programs are Space holder Character Sensitive.

To indent the three lines, I selected them all and then pressed the Tab key.

To unindent, select some lines and press Shift-Tab. For commenting: select lines and press command(control)-k

Mu CircuitPython Mode Cheat Sheet 1.jpg

4. Interacting to the Serial Console

The REPL

The other feature of the serial connection is the Read-Evaluate-Print-Loop, or REPL.

The REPL allows you to enter individual lines of code and have them run immediately.

It's really handy if you're running into trouble with a particular program and can't figure out why.

It's interactive so it's great for testing new ideas.

To use the REPL, you first need to be connected to the serial console.

Once that connection has been established, you'll want to press Ctrl + C.

If there is code running, it will stop and you'll see Press any key to enter the REPL. Use CTRL-D to reload.

Follow those instructions, and press any key on your keyboard.

https://learn.adafruit.com/adafruit-circuit-playground-express/the-repl


6. CircuitPython Made Easy

Libraries:

Libraries are codes other people have written for you. The libraries we will be using are included as part of the CircuitPython code, but you still must import them into your program. Other libraries, for many uses, must be downloaded and placed in a folder named lib on the CIRCUITPY drive.


CircuitPython Libraries already included in CPX, But if you are using CPB, (CPX = Circuit Playground Express, CPB = Circuit Playground Bluefruit)

you need to install CircuitPython Libraries by download the file and put them in the folder named lib on the CIRCUITPY drive.



we will use circuit playground libraries, a simple way to include the Circuit Playground functionality in our code.

more reference and examples:

https://learn.adafruit.com/circuitpython-made-easy-on-circuit-playground-express



SAVE AS:

if you want to save the code.py file in different names as well as in different locations:

double click on the file name in Mu editor.

Save-as-Capture.PNG

Examples with CPX On-Board sensors:

1. Red LED:

https://learn.adafruit.com/circuitpython-made-easy-on-circuit-playground-express/red-led

2. Slide Switch:

https://learn.adafruit.com/circuitpython-made-easy-on-circuit-playground-express/slide-switch


3. Neopixel
3.1 Smiley face
from adafruit_circuitplayground import cp
cp.pixels.brightness=0.3

while True:
    # the smiley's eyes
    cp.pixels[1]=(255,0,0)
    cp.pixels[3]=(255,0,0)
    #the smiley's mouth
    cp.pixels[5]=(255,0,0)
    cp.pixels[6]=(255,0,0)
    cp.pixels[7]=(255,0,0)
    cp.pixels[8]=(255,0,0)
    cp.pixels[9]=(255,0,0)


import time
from adafruit_circuitplayground import cp
cp.pixels.brightness=0.3

while True:
    cp.pixels.brightness=0.3

# the smiley's eyes
    cp.pixels[1]=(255,0,0)
    cp.pixels[3]=(255,0,0)
#the smiley's mouth
    cp.pixels[5]=(255,0,0)
    cp.pixels[6]=(255,0,0)
    cp.pixels[7]=(255,0,0)
    cp.pixels[8]=(255,0,0)
    cp.pixels[9]=(255,0,0)
    time.sleep(3)
    cp.pixels.brightness=0
    
#the smiley's eyes
    cp.pixels[1]=(255,255,0)
    cp.pixels[3]=(255,255,0)
#the smiley's mouth
    cp.pixels[5]=(255,255,0)
    cp.pixels[6]=(255,255,0)
    cp.pixels[7]=(255,255,0)
    cp.pixels[8]=(255,255,0)
    cp.pixels[9]=(255,255,0)
    time.sleep(3)
Neopixels for loops
import time
from adafruit_circuitplayground import cp
while True:
    for x in range(0,12):
        for j in range(0,10,1):
            print(j)
            cp.pixels[j]=(255,0,0)
            cp.pixels.brightness=0.3
            time.sleep(0.1)
        time.sleep(0.5)
        for j in range(9,-1,-1):
            print(j)
            cp.pixels.brightness=0.3
            cp.pixels[j]=(0,0,255)            
            time.sleep(0.1)
        time.sleep(0.5)
4. light sensor:

https://learn.adafruit.com/circuitpython-made-easy-on-circuit-playground-express/light

import time
import time
from adafruit_circuitplayground import cp

while True:
    print("Light:", cp.light)
    print(cp.light*5)
#cp.play_tone(frequency, seconds)
    cp.play_tone(cp.light*5, 0.1)
    time.sleep(0.1)
5. play tone:

https://learn.adafruit.com/circuitpython-made-easy-on-circuit-playground-express/play-tone


Double Tap play tone and neopixel
from adafruit_circuitplayground import cp
# Change to 1 for detecting a single-tap!
cp.detect_taps = 2
cp.pixels.brightness=0.3

while True:
    if cp.tapped:
        print("Tapped!")
        cp.red_led = True
        time.sleep(0.1)
        cp.play_tone(262, 1)
        for i in range(0,10,1):
            cp.pixels[i]=(255,0,0)
        time.sleep(0.5)

    else:
        cp.red_led = False
        for i in range(0,10,1):
            cp.pixels[i]=(0,0,255)
capacitive touch piano:
import time
from adafruit_circuitplayground import cp

cp.pixels.brightness = 0.3

while True:
    if cp.touch_A1:
        print("Touched A1!")
        cp.pixels.fill((255, 0, 0))
        cp.play_tone(262, 0.2)
    if cp.touch_A2:
        print("Touched A2!")
        cp.pixels.fill((210, 45, 0))
        cp.play_tone(294, 0.2)
    if cp.touch_A3:
        print("Touched A3!")
        cp.pixels.fill((155, 100, 0))
        cp.play_tone(330, 0.2)
    if cp.touch_A4:
        print("Touched A4!")
        cp.pixels.fill((0, 255, 0))
        cp.play_tone(349, 0.2)
    if cp.touch_A5:
        print("Touched A5!")
        cp.pixels.fill((0, 135, 125))
        cp.play_tone(392, 0.2)
    if cp.touch_A6:
        print("Touched A6!")
        cp.pixels.fill((0, 0, 255))
        cp.play_tone(440, 0.2)
    if cp.touch_TX:
        print("Touched TX!")
        cp.pixels.fill((100, 0, 155))
        cp.play_tone(494, 0.2)
#    time.sleep(0.1)

combine the code from examples "Play tone" and "light sensor". and use light sensor input to generate tones.

Conditionals:

Evaluate a condition and react. If True, do this. If False, do this other thing.

"while" creates a repeated action. while this condition is true, continue to do this thing over and over. 

 when the condition is false, go on to the rest of the program.

"if" creates a single action. if this condition is true, do this thing. if false, don't do it.

"else" creates a single action, when the if the condition is false.
for loop
A for loop is used for iterating over a sequence. (in our previous example, we iterated through all the Neopixels on CPX using for loop)


There is a CircuitPython reference PDF:

File:CircuitPython Reference Sheet.pdf

please read it after this lesson.
8. Play audio file

https://learn.adafruit.com/circuitpython-made-easy-on-circuit-playground-express/play-file

#https://learn.adafruit.com/circuitpython-made-easy-on-circuit-playground-express/play-file

from adafruit_circuitplayground import cp

cp.pixels.brightness = 0.3
while True:
    if cp.button_a:
        cp.play_file("dip.wav")
        for x in range(5,10,1):
            cp.pixels[x]=(0,0,0)

        for y in range(0,5,1):
            cp.pixels[y]=(255,0,0)

    if cp.button_b:
        cp.play_file("rise.wav")
        for j in range(5,10,1):
            cp.pixels[j]=(0,255,50)

        for i in range(0,5,1):
            cp.pixels[i]=(0,0,0)

7. CPX external inputs and outputs Wiring

Circuit playground Adafruit Circuit Playground Express Pinout.png

Simple digital and analog inputs and output

1. Digital:

https://learn.adafruit.com/circuitpython-essentials/circuitpython-digital-in-out


2. Digital in and out With external electronic components:

After we followed the example, now let's try to connect an external Led.

let's connect the led to A1(D6). There is a list of pinout from Adafruit's website:

https://learn.adafruit.com/adafruit-circuit-playground-express/pinouts

CircuitPlayground-express leds.jpg

instead of the onboard button, we can also use an external button

CircuitPlayground-express leds-button.jpg


Digital-external.PNG


3. Analog input:

https://learn.adafruit.com/circuitpython-essentials/circuitpython-analog-in


4. Analog input and output with external electronic components:

CircuitPlayground-express cpx-analog-read.jpg

Analog-read-led-code.PNG

import time
import board
import analogio
from adafruit_circuitplayground import cp
analogin = analogio.AnalogIn(board.A2)
def getVoltage(pin):
    return (pin.value * 3.3) / 300
while True:
    sensor = getVoltage(analogin)
    cp.play_tone(sensor,0.05)
    print("analog voltage:", sensor)
    time.sleep(0.01)

Other external wiring

Connect to external speakers:


Circuit playground hp.png


Connect to servo motors:

single motor:

Circuitpython safe.png

multiple motors:

Circuit playground CProbot.png


you can find the library and code for the servo motors here:

https://learn.adafruit.com/adafruit-circuit-playground-express/circuitpython-servo


ultra-sonic sensor:

Sensors cpx-hcsr06-breadboard-crocclipse bb.png

https://learn.adafruit.com/jack-o-theremin/circuit-python-code

Fun projects made with CPX and CircuitPython Made Easy Lib

[UFO Flying Saucer]

[Combo Dial Safe with Circuit Playground Express]

[FruitBox Sequencer: Musically Delicious Step Pattern Generator]


-Paged updated by NaN 2024